10:00 – 10:45 | CODESYS in the FIELD | KUKA

• Topic: Using CODESYS on a KUKA robot controller KRC5-2.
• Description: Internal and external data exchange.
• Presented by: Constantin Opreau, Sr. Robotics Software Engineer, KUKA

---

 

10:45 – 11:30 | CODESYS in the FIELD | Application Story with EMR

• Topic: SMS command and control from CODESYS — direct to the cellular modem, with no cloud in the middle
• Description: Live and two-way over a real carrier network, against a simulated station in our office. 
   An audience member text it and gets an answer.
• Presented by: Matthew Knight, EMR Associates

---

 

11:30 – 12:15 | CODESYS in the FIELD | Application Story with Packsize

• Topic: PACKSIZE CODESYS is a part of the workflow.
  These include MCP, but also Digital Twin and Machine Diagnostics.
• Presented by:
  • Rob Harker, Sr. Director R&D Hardware, PACKSIZE (Intro to PACKSIZE)
  • Adam Cowley, PhD. - Sr. Scientist, PACKSIZE (Diagnostics and "What’s Next")
  • Serei Panh, Sr. Engineer, Controls, PACKSIZE (MCP)
  • Joe Rainwater, Sr. Engineer, Controls, PACKSIZE (Digital Twin)
  • Joey Thomas, Engineer, Mechanical, PACKSIZE (Digital Twin)
  • John Hunsberger, Engineer, Controls, PACKSIZE (Digital Twin)

---

 

12:15 – 13:00 | CODESYS in the FIELD | CODESYS TECH BITE | Application Stories | MCP Server

• Topic: Concrete implementation of the CODESYS Simulation Interface
• Description: A video demonstration of the capabilities enabled by the CODESYS Simulation interface. A description of how the simulation workflow is used by the customer will be presented.
  Various use cases (single controller/multi-controller, end user hardware vs. software controller) will be discussed.
• Presented by: Winston Jenks, Technical Director, Cape Software

 
 

• Topic: MOXA application story
• Presented by: Hailey Terrones, Business Development Manager | Data Center Energy Business Group, Moxa Americas

 
 

• Topic: MCP on the factory floor
• Presented by: Vinny Endres, President, Bitmasked Automation

---

 

13:00 – 13:30 | Q&A All speakers of the day.

 
 

FULL AGENDA & REGISTRATION FOR DAY 2

10:00 – 10:45 | CODESYS Deep Dive AI and CODESYS 4

• Topic: CODESYS - Live AI demonstration
• Description: A live look at how AI is being built into the CODESYS engineering workflow, from assisted programming to faster diagnostics and configuration.
  Markus Bachmann and Shane Pratt walk through real, hands-on examples inside the CODESYS Development System rather than slides.
• Presented by:
  • Markus Bachmann, President, CODESYS Corporation
  • Shane Pratt, Software Developer, Support Engineer, CODESYS Corporation
     

• Topic: CODESYS 4 – Live demo
• Description:
  • Shane Pratt gives a hands-on, live tour of CODESYS 4, highlighting what's new and how it builds on the CODESYS engineering environment customers already know.
  • The demo walks through core workflows end to end, from project setup to deployment.
    Attendees will leave with a clear picture of what to expect as CODESYS 4 becomes available.
• Presented by: Shane Pratt, Software Developer, Support Engineer, CODESYS Corporation

 

---

 

10:45 – 11:30 | CODESYS in the FIELD | Application Story with NODKA

• Topic: Application Story with NODKA
• Description:
  • This presentation examines what happens when a single industrial PC must maintain deterministic EtherCAT control while also serving OPC UA data to SCADA, MES, or historians.
  • It shows where timing and jitter are introduced, how BIOS and firmware settings affect real-time performance, and how NODKA IPC hardware with CODESYS can be tuned and measured under load.
     
• Presented by: Eddie Chau, Account Executive | B2B Sales & Business Development, NODKA

 

---

 

11:30 – 12:15 | CODESYS in the FIELD | OPTO22

• Topic: From Smart Sumps to Smarter Mines
• Description: See how Surety Automation used CODESYS on Opto 22's groov RIO to rethink underground mine control, replacing traditional PLC panels with a compact, software-driven architecture. What started as a smarter way to control sump pumps became a repeatable model for connected mining, cutting hardware costs 30-40% and engineering time from weeks to hours.
• Presented by: Dan White, Director of Technical Marketing, OPTO22

 

---

 

12:15 – 13:45 | CODESYS in the FIELD | CODESYS TECH BITE | Live demos

• Topic: emberNET Live:
  Fireball Industries and the Future of Manufacturing
• Description: Step inside emberNET, Fireball Industries secure industrial edge platform built to give manufacturers greater visibility, control, and resilience — without a rip-and-replace overhaul.
  In this live demonstration, see how emberNET connects PLCs, HMIs, SCADA, edge devices, and business software in one zero-trust architecture; runs modern applications alongside legacy workloads; and streamlines deployment and management across sites.
  Discover a practical path to more secure, scalable operations and faster digital transformation.
• Presented by: Eric Seme, CEO, FIREBALL INDUSTRIES

• Topic: Security & Sovereignty At The Edge:
  Edge Computing Infrastructure for Virtual PLCs
• Description: In this presentation we look at the trends toward virtualization of automated processes, and how to mitigate the risks associated with newer advanced deployments. Protecting data at rest, data in motion, and data in process is crucial to a secure and trusted automation environment, but the barriers to entry can be significant. New tools and platforms are discussed to ensure that advanced algorithms for AI and virtualized PLCs that are used in automation and control environments can be fully trusted.
• Presented by: Rudi Carolsfeld, Founder & Chief Revenue Officer, GECCO 

• Topic: WEG Wizard for CODESYS – Simplifying Integration, Configuration, and Mapping
• Description: Discover the robust automation capabilities of CODESYS paired with WEG’s custom integration tool.
  We simplify complex network setups and parameter adjustments to turn a steep learning curve into a user-friendly approach.
• Presented by:
  • Sharonda Young, Product Manager Controls, WEG
  • Rafael Derencio, Business Development PLCs & HMIs, WEG

 

---

 

13:45 – 14:00 | Q&A | All speakers of the day.

 

FULL AGENDA & REGISTRATION FOR DAY 4